|
Here are 2017 press release archive pages
1 |
2 |
3 |
4 |
5
 Anatech Electronics, Inc. offers the industry's
largest portfolio of high-performance standard and customized
RF and
microwave filters and filter-related products for military, commercial, aerospace
and defense, and industrial applications up to 40 GHz. Anatech has introduced three
new filters for your convenience: a 4432 MHz WiFi cavity filter with N connectors, a
899-944 MHz LC duplexer filter with N connectors (std), and WiFi cavity bandpass filter
with SMA connectors (std) ...
 JFW Industries and IEEE offer this application
note titled
An Introduction to Programmable Attenuator Systems. "An attenuator
is an electrical component that reduces the amplitude of a signal passing through it
without significantly degrading the integrity of that signal. In a programmable or step
attenuator, the attenuation is controlled externally by an external analog or digital
signal, either manually or via a computer. Depending on the model, the maximum attenuation
ranges from 0 dB to 127 dB, in steps as small ...
 At
Axiom Test Equipment
we provide high-quality services and affordable solutions such as test equipment rental,
test equipment sales, and test equipment repair. Find out how we help customers select
the equipment they need and see our lab where all of our equipment gets checked &
accessorized before securely shipping to you. The
Keysight / Agilent N5245A PNA-X Network Analyzer 10 MHz to 50 GHz
is our Featured Product for this End-of-Year special offers ...
 Saelig Company has introduced the
Siglent SDS1104X-E (100 MHz) and Siglent SDS1204X-E (200 MHz)
four-channel oscilloscopes that are built on the same platform as the very popular SDS1202X-E
but with many improvements, including two 1 GSa/s ADCs and two 14 Mpt memory
modules. Waveform capture rates are up to 100,000 wfms/s in normal mode and 400,000 wfms/s
in sequence mode. The SDS1000X-E scopes feature a large 7" 256-level color display with
intensity grading and color temperature features to show signal event occurrence ...
 Led by Airbus, JUICE is a European Space Agency
(ESA) deep space mission to study the icy moons of Jupiter. The objectives are to explore
the atmosphere and magnetosphere of the moons and investigate whether there are liquid
oceans suitable for habitation under the thick icy crusts of moon Ganymede. Rohde &
Schwarz provided two
R&S ESR EMI test receivers to measure the antenna's radiation
pattern during these tests. Uwe Körber of the Test and Measurement Division's sales ...
 Planar Monolithic Industries (PMI) recently introduced four new products
in their extensive line of RF and microwave components. Included are a 1-18 GHz
low noise amplifier; a 1 to 18 GHz, a 1 to 18 GHz high speed threshold detector; a 11.825
GHz bandpass filter with a 1,850 MHz pass band; and a single pole, seven throw absorptive
switch with phase and amplitude matching of ±6° and ±0.5 dB. Contact PMI today for more
information ...
 December 11 to 13. The genesis of the
IMaRC series of conferences can
be traced back to the India Initiative adopted by the IEEE Microwave Theory and Techniques
Society (MTT-S) in 2005, under the guidance of the President of the Society in 2005,
Late Professor K. C. Gupta. This led to several MTT-S delegations visiting India in 2006,
2008, and 2009, including discussion with MTT-S membership in India, and participation
in local conferences. These visits resulted in a number of accomplishments during 2008-2012,
including the establishment ...
 Radiocrafts AS,
a leading provider of RF modules and wireless connectivity solutions, announced today
a new dual mode radio module platform for Smart Metering, Internet of Things (IoT) and
Wireless Sensor Networks applications. The module has a 2.4 GHz radio transceiver is
addition to the sub-Giga Hertz transceiver that is available on the RC18x0 module that
was announced by Radiocrafts in September. The
RC1885 radio
module platform is a surface-mounted ultra-low power RF module based on the CC1350 system ...
 Rhode & Schwarz announces an app note titled
"Group Delay and Phase Measurement on Frequency Converters" - available
as a free download. You don't need to register if you use the hyperlinks provided here.
"This application note provides basic information about the concept of a group delay
measurement with spectrum analyzers and signal generators, and how this method simplifies
the test setup and improve s the measurement speed. Measurement examples show the limiting
factors of this approach and help the user to understand ..."
 Saelig Company has introduced four new members
of Pico Technology's
PicoScope 9300 family of sampling oscilloscopes. With up to 25 GHz
bandwidth, the PicoScope 9300 series addresses digital and telecommunications applications
of 10 Gb/s and higher, microwave applications up to 25 GHz, and timing applications
with a resolution down to 64 fs. The new 15 GHz models replace the preceding
9200 Series 12 GHz models, with significantly upgraded specifications at lower prices.
The 9301-15 gives the ...
 December 7, 11:00 am. "Interference in the radio
access network is ubiquitous and becoming more critical as the deployment of the latest
cellular standards increases sensitivity to interference and subsequent degradation of
network performance. This webinar will compare and contrast different techniques to geolocate
sources of
interference in mobile networks, with a focus on POA vs. AOA. A real
interference geolocation use case will be shared and a definitive procedure for the fastest
interference location will be ..."
 The
ARRL Store is having
a Black Friday (and Saturday and Sunday) sale. Enter the
coupon code of SAVETEN at checkout to save $10 on orders over $70. There are
also buy-one-get-one-free deals and members-only pricing on some items. The 2018
ARRL Handbook for Radio Communications is supposed to be really nice with lots of
new material. I haven't bought a new edition since 2012 - sure would make a nice present
;-) ...
 A Microwave Journal technical education webinar
will highlight the use of NI AWR software products specifically Microwave Office circuit
design and
AntSyn™ antenna synthesis and optimization software, for designing
a compact internet of things (IoT) dual-band Wi-Fi multiple-in-multiple-out (MIMO) array
antenna. Presented by Dr. Derek S. Linden, director of technology for AntSyn at AWR Group,
NI, the webinar will describe how to determine the initial specifications, explore the
design space, and obtain optimized antennas from the ...
 ConductRF is offering standard
D38999 RF coaxial
cable assembly configurations with RF Contacts including; BMA to 20 GHz SMPM
to 60 GHz Size #8 to 18 GHz Size #12 Mil-Spec. Size #16 Mil-Spec. Cable choice
include Low Loss Flexible and standard RG styles. Custom marking and also ruggedization
coverings including Nomex weave available ...
 "Qualcomm, China Mobile and ZTE combined their
5G expertise and demonstrated what's being described as the world's first end-to-end
5G New Radio (NR) Interoperability Data Testing (IoD) system with
a data connection based on 3GPP Release 15. Conducted at China Mobile's 5G Joint Innovation
Center, the demo used ZTE's 5G NR) system with a data connection based on 3GPP Release
15. Conducted at China Mobile's 5G Joint Innovation Center, the demo used ZTE's 5G NR)
system with a data connection based on 3GPP Release 15. Conducted at China Mobile's 5G
Joint Innovation ..."
 Anatech Electronics offers the industry's largest portfolio of high-performance
standard and customized RF and microwave filters and filter-related products for military,
commercial, aerospace and defense, and industrial applications up to 40 GHz. Anatech
has introduced a two new filters and a gas tube surge arrestor for your convenience:
a surface mount 32.0 MHz SAW filter, a leaded 1.25 MHz crystal filter, and a cool-looking
DC-3 GHz gas tube surge
arrester with SMA connectors ...
 Webinar Title:
Pulse Shaping in High Power Solid State Jamming Amplifiers When: Thursday, November
30, 12 pm to 1:30 pm Location: Marriott Marquis Hotel Marquis Ballroom. Pulse shaping,
as it is done today, is an effort to fix fidelity issues caused by the transmitting amplifier
and is accomplished by a combination of imperfect methods, most external to the amplifier.
In this technical session, Paulo Correa will describe a new high power amplifier architecture
with built in real time feedback that is capable of matching the input signal shape,
minimizing droop, overshoot, ringing, rise ...
 Keysight Technologies today announced that its
corporate headquarters, located at 1400 Fountaingrove Parkway, Santa Rosa, California,
is temporarily
shut down due to the wildfires burning in the area. Contrary to some news reports,
as of 3 p.m. PT, a Keysight representative confirmed that all four main buildings are
intact, although there appears to be some minor damage. Two modular structures and several
automobiles suffered more extensive damage. The company will provide further information
after they are granted full access to the facility ...
 It's an exciting time for
RF/Microwave design
and test hardware to meet customer's requirements for 5G, IoT, Satellite Communications,
etc. Mini-Circuits is pushing beyond 40 GHz and also focusing on 5G Applications
at sub-6 GHz, 28 GHz and 39 GHz. Also working on custom designs. We recently
announced in Mini-Circuits Components Now Available in Modular Drop-In Format from X-Microwave,
that over 400 Mini-Circuits are available using X-Microwave blocks ...
 Skyworks Solutions,
an innovator of high performance analog semiconductors connecting people, places and
things, today announced that ZTE is incorporating various products from its portfolio
to power several of their all-in-one platforms for the connected car. Skyworks' innovative
LTE and connectivity solutions help transform cars into rolling Wi-Fi hotspots, enabling
vehicle tracking, diagnostics, safety and security features. To support the numerous
wireless protocols and frequency bands required by advanced wireless networks ...
 Triad RF Systems announces the
TA1167, a compact 5 W amplifier suitable for COFDM video links
in the UAS and DTV broadcast space, covering 6,400 to 7,100 MHz. It's compact, efficient,
design allows for camera-back installations or other applications that are SWaP constrained.
The amplifier is capable of 1 W COFDM meeting -30 dB ACPR. Features include:
Over / under / reverse voltage protection, optional heatsink, high speed On/Off control,
and thermal shutdown ...
 Axiom Test Equipment, a provider of efficient
and cost effective solutions customers' test equipment needs, offer the following special
deals on their inventory. Axiom offers our customers several practical, efficient and
cost effective solutions for their business or projects' test equipment needs. Whether
you need to rent &
buy test equipment,
repair test equipment, sell or trade equipment, we are committed to providing superior
customer service and high quality electronic test equipment ...
 KR Electronics part number
3012-455
is a 160 MHz bandpass filter designed for Positive Train Control (PTC) applications.
Encapsulated for enhanced shock and vibration resistance, 50 Ω source and load, N(F)
to N(M) connectors. The filters are encapsulated/ruggedized for enhanced shock and vibration
resistance. Thousands are currently installed and operating successfully in the field
with major rail companies. Other frequencies and bandwidths are available ...
 Empower's Model
SKU 2126 was mounted in the test fixture undergoing 40g shock testing
while operating uninterrupted at full rated output power. The amplifier system was tested
for
MIL-STD-810E Method 514.4 vibration 40 g Peak while operational for 270 minutes
in each axis. The unit also passed Shock – MIL-STD 810F Method 516.5 3 Axes, Quantity
18 pulses per direction 11 mSec Sawtooth Pulse / 40g Peak. Keep in mind this is
not a custom design. This is our COTS model with a dust filter added ...
 Microwave Filter Company (MFC) introduces their
complete line of broadcast filter products. Competitive pricing, exceptional quality,
short lead times. Contact our experienced staff to discuss your requirements. Download
their full MFC catalog.
 Southwest Antennas, an industry leader in innovative
MIMO antenna solutions, is pleased to introduce two new compact MIMO sector antennas
to their existing line-up of directional antenna solutions. Designed for 2 port (2X2)
MIMO and MANET radios, these
compact sector antennas feature 10 dBi of peak gain and 56 degrees
of horizontal and vertical beamwidth. Measuring only 4.3" in length and height and 2.9"
wide, these small antennas ...
 Planar Monolithic Industries (PMI) recently introduced
four new products in their extensive line of
RF and microwave components.
Included are a 1-18 GHz low noise amplifier; a 1 to 18 GHz, 10-bit digital RF attenuator;
a 1 to 12 GHz high speed threshold detector; and a 2 to 18 GHz SP6T PIN diode RF switch.
Contact PMI today for more information ...
 Pasternack, a leading provider of RF, microwave
and millimeter wave products, has unveiled a new series of low insertion loss repeatability
electromechanical switches. Test and measurement applications require
signal processing component performance to be highly accurate and repeatable over long
periods and under extreme conditions. In automated test systems where electromechanical
switches are used for signal monitoring and routing applications, every switch will add
repeatability error ...
 Empower's tested and field proven rugged design
is common across all our
Next Generation Family of amplifiers and is the result of our patented
architecture and design goal to minimize RF power losses along the internal signal path,
simplify manufacturing and provide for ease of servicing. The consequence of this elegant
electro-mechanical compact structural design is a COTS amplifier that is inherently durable.
Empower's family of solid state power amplifiers is thermally and structurally designed
to meet today's stringent ...
 ConductRF offers straight and right angle
low PIM connectors for 7/16,
N, SMA, QMA, 4.1/9.5 and 4.3/10 interfaces. PIM levels vary depending on cable and configuration.
We also offer coaxial adapters. Download our datasheets by clicking the pictures above
for more detail of call us at +1 978 374 6840 ...
 Triad RF Systems announces the
TA1164, a broadband GaN solid state power amplifier (SSPA) designed
for general-purpose RF test and military jamming applications. Internal DC conversion
allows for a 12-36 Vin supply voltage. CW output power is 10 W min,
20 W typical across the band. This class AB GaN module is designed for both military
and commercial applications. It is capable of supporting any signal type and modulation
format, including but not limited to 3 - 4G telecom, WLAN ...
 Short, informative videos highlighting new features
and user productivity enhancements in the V13 release of NI AWR Design Environment are
now available for viewing on the AWR.TV found within the
V13 Playlist. Specific videos within the playlist include: EM Ports and Integration
Additions, Measurement and Layout Improvements, Simulation Results and Enhanced Markers
Optimization, Synthesis Wizards, Embedded Sweeps and More ...
 Innovative Power Products introduces their new
model IPP-8057, a 150 watt, 33 dB, Surface Mount Dual Directional
Coupler that operates from 500 – 2500 MHz. The IPP-8057 is a broadband design
which provides separate coupled ports for both forward and reflected signals with internal
terminations. This unique coupler is produced in a Surface Mount (SMD) package size of
0.500(W) x 1.000(L) x 0.139(H) inches and was designed to reduce the size, weight and
cost ...
 Anatech Electronics, a manufacturer of RF and microwave
filters, has published its August newsletter. In it, Sam Benzacar discusses an ambient
electrical noise problem that neither his filter company nor anyone else's filter company
can do anything about - signals beginning in the super low frequency (30 Hz - 3 kHz)
generated by or as a result of operation from AC line voltages. That includes everything
from bedside clocks to smart refrigerators. The problem is growing rapidly. Ironically,
just yesterday I posted an article titled "Electronic Pollution
..."
 Saelig Company has introduced the
IkaScope WS200, , a pen-shaped
battery-powered wireless oscilloscope that streams captured signals to almost any WiFi-connected
screen. The IkaScope WS200 offers a 30 MHz bandwidth with its 200 MSa/s sampling
rate and the maximum input is ±40 Vpp. It provides galvanically-isolated measurements
even when a USB connection is charging the internal battery. The IkaScope WS200 will
work on desktop computers as well as on mobile devices like tablets ...
KR Electronics part number
3012-220
is a 220 MHz bandpass filter designed for Positive Train Control (PTC) applications.
Encapsulated for enhanced shock and vibration resistance, 50 Ω source and load, N(F)
to N(M) connectors. The filters are encapsulated/ruggedized for enhanced shock and vibration
resistance. Thousands are currently installed and operating successfully in the field
with major rail companies. Other frequencies and bandwidths are available ...
 Withwave's
W-Test cable assemblies are complete line of high precision flexible microwave cable
assemblies, specially for stable phase testing. These WT series are designed by excellent
microwave interconnection technologies. The WT500 & 670 cable assemblies, operating
to 50 GHz and 67 GHz, respectively, have excellent insertion loss, high phase/amplitude
stability in relation to temperature ...
 Agendas are set and registration opened for the
Russia leg of AWR Design Forum (ADF) 2017, an open forum that aims to bring together
NI AWR Design Environment
customers, partners and engineering professionals to learn, network and collaborate on
the design of today's RF/microwave circuits and systems. ADF 2017 will visit three
cities in Russia: St. Petersburg on October 3, Moscow on October 4 and Zelenograd on
October 5 ...
 According to Microwave Journal Editor
Patrick Hindle, "Antenna measurements are difficult to make due to their multi-directional
nature, their cables / connections to equipment and interfering signals in the environment.
The measurement setup, surrounding environment and physical connections all need to be
carefully specified and setup, paying close attention to the instruments and materials
used." Copper Mountain Technologies collaborated with Microwave Journal to offer you
this free eBook,
Precision Antenna Measurements, on precision antenna measurements ...
 The LDMOUNT is ideal for pump and communication
diode lasers. The
LDMOUNT from Wavelength Electronics is designed for optoelectronic
modules in a 14-pin butterfly package that require up to 5A. With integrated heatsinking,
built-in safety features, and easy connection to eight different high performance Wavelength
controllers, the LDMOUNT can be used in a variety of applications, mounted on an optics
table or to a chassis ...
 ConductRF's skill in the manufacturing of
Phase Matched
RF Cable Solutions is second to none. We have phase matched a diverse array of solutions
from Low Frequency RG and LMR Cables to more premium exotic cables up to 70 GHz.
Flexible, conformable & semi-rigid, phase & amplitude stable, low loss &
high power, phase differential as low as ±0.2 °/GHz, many connector types, indoor &
outdoor solutions. A broad base of standard connectors and cables in stock, we turn solutions
around fast ...
KR Electronics part number
3012-160
is a 160 MHz bandpass filter designed for Positive Train Control (PTC) applications.
Encapsulated for enhanced shock and vibration resistance, 50 Ω source and load, N(F)
to N(M) connectors. The filters are encapsulated/ruggedized for enhanced shock and vibration
resistance. Thousands are currently installed and operating successfully in the field
with major rail companies. Other frequencies and bandwidths are available ...
 Axiom Test Equipment, a provider of efficient
and cost effective solutions customers' test equipment needs, offer the following special
deals on their inventory. Axiom offers our customers several practical, efficient and
cost effective solutions for their business or projects' test equipment needs. Whether
you need to rent &
buy test equipment,
repair test equipment, sell or trade equipment, we are committed to providing superior
customer service and high quality electronic test equipment ...
 Keysight Technologies today announced the latest
release of its SystemVue electronic system level (ESL) software. Offering unique phased-array
antenna and other 5G functionality, Keysight EEsof EDA's
SystemVue
2017 provides designers with the industry's first 5G design and verification process.
SystemVue is the industry's premier simulation platform for system design and verification.
The software enables users to combine existing baseband, RF and channel models for evaluation
of the entire system. SystemVue 2017 allows designers to accurately design phased-array
antennas for 5G mobile networks. Unlike other tools on the market ...
 Skyworks today announced that its
SkyOne® Ultra
2.5 and diversity receive (DRx™) modules for mobile applications have been adopted
by some of the world's leading machine-to-machine (M2M) module manufacturers to provide
high performance, high speed 4G LTE capability. These fully integrated and tested systems,
packaged in extremely small form factors, enable M2M suppliers including Fibocom, Sierra
Wireless, and Telit to extend plug and play, high-speed cellular connectivity across
an endless array of IoT ...
 Anatech Electronics, a manufacturer of RF and
microwave filters, has published its September newsletter. In it, Sam Benzacar discusses
the Federal Communication Commission's relatively new (2015) three-tiered "spectrum sharing"
scheme titled Citizens Broadband Radio Service (CBRS). It provides for 150 MHz
of spectrum between 3550 and 3700 MHz. Don't be fooled by the name, though. The
"Citizens [broad]Band" nomenclature harkens back to Citizen Band (CB) radio (27 MHz),
but CBRS spectrum will be sold to the highest bidder in 10 MHz chunks that are subordinated
to primary user claims. So, don't be looking ...
 Pasternack, a leading provider of RF, microwave
and millimeter wave products, has released a new series of
relay controlled programmable attenuators. Typical applications include
signal conditioning and level control, matching impedances of sources and loads and measuring
the gain or loss of two-port devices. Relay Controlled Programmable Attenuators offer
accurate and stable performance with very low harmonic distortion (IMD) and cover multiple
RF frequency bands down to DC ...
 VidaRF offers DC to18 GHz hand formed
semi-flex cable assemblies. The
outer shield is copper braid, silver plated to minimize signal leakage and maintain flexibility
for ease of bending to your requirement. Option to include insulated clear or blue jacket
reducing risk of shorting. Available in a wide variety of connector combinations. Excellent
return loss and insertion loss ...
 Radiocrafts AS,
a leading provider of RF modules and wireless connectivity solutions, provides a new
ultra-low power radio module platform for Smart Metering, Internet of Things (IoT) and
Wireless Sensor Networks applications. The new compact RF module is also suitable for
6LoWPAN based IP networks. The RC18x0 Radio Module platform is a series of compact surface-mounted
ultra-low power RF modules based on the CC1310 system-on-chip from Texas Instruments.
The modules ...
KR Electronics part number
3012-916
is a 916 MHz bandpass filter designed for Positive Train Control (PTC) applications.
Encapsulated for enhanced shock and vibration resistance, 50 Ω source and load, N(F)
to N(M) connectors. The filters are encapsulated/ruggedized for enhanced shock and vibration
resistance. Thousands are currently installed and operating successfully in the field
with major rail companies. Other frequencies and bandwidths are available ...
 Saelig Company announces the availability of the
compact RTSA7550
Real-Time Spectrum Analyzer - a powerful, full-featured spectrum analyzer designed
to analyze wireless signals in real-time (not progressively scanned). This is essential
for seeing intermittent and frequency-varying signals. The Model RTSA7550 has all the
standard features of a conventional spectrum analyzer such as frequency controls, marker
functions, and multi-trace functionality. Instead of scanning through a frequency range,
the RTSA sees all frequencies at once, thus catching intermittent signals ...
 ConductRF invites
you to visit their design and sales team in booth #528 at Electronic Design Innovation
Conference & Exhibition (EDI CON) in Boston. The event runs September 11-13 at the
Hynes Convention Center. ConductRF offers off-the-shelf and custom RF coaxial connector
and cable solutions for applications up to 110 GHz ...
|
