|
Here are 2017 press release archive pages
1 |
2 |
3 |
4 |
5
 Keysight Technologies today announced the latest release
of its SystemVue electronic system level (ESL) software. Offering unique phased-array antenna
and other 5G functionality, Keysight EEsof EDA's
SystemVue 2017
provides designers with the industry's first 5G design and verification process. SystemVue
is the industry's premier simulation platform for system design and verification. The software
enables users to combine existing baseband, RF and channel models for evaluation of the entire
system ...
 Skyworks today announced that its
SkyOne® Ultra
2.5 and diversity receive (DRx™) modules for mobile applications have been adopted by
some of the world's leading machine-to-machine (M2M) module manufacturers to provide high
performance, high speed 4G LTE capability. These fully integrated and tested systems, packaged
in extremely small form factors, enable M2M suppliers including Fibocom, Sierra Wireless,
and Telit to extend plug and play, high-speed cellular connectivity across an endless array
of IoT ...
 Pasternack, a leading provider of RF, microwave and
millimeter wave products, has released a new series of
relay controlled programmable attenuators. Typical applications include
signal conditioning and level control, matching impedances of sources and loads and measuring
the gain or loss of two-port devices. Relay Controlled Programmable Attenuators offer accurate
and stable performance with very low harmonic distortion (IMD) and cover multiple RF frequency
bands down to DC ...
 Radiocrafts AS,
a leading provider of RF modules and wireless connectivity solutions, provides a new ultra-low
power radio module platform for Smart Metering, Internet of Things (IoT) and Wireless Sensor
Networks applications. The new compact RF module is also suitable for 6LoWPAN based IP networks.
The RC18x0 Radio Module platform is a series of compact surface-mounted ultra-low power RF
modules based on the CC1310 system-on-chip from Texas Instruments. The modules ...
 VidaRF offers DC to18 GHz hand formed
semi-flex cable assemblies. The outer
shield is copper braid, silver plated to minimize signal leakage and maintain flexibility
for ease of bending to your requirement. Option to include insulated clear or blue jacket
reducing risk of shorting. Available in a wide variety of connector combinations. Excellent
return loss and insertion loss ...
Triad RF Systems Intros a 20 to 1,000 GHz, 40 W JTRS Power Amplifier
Peregrine Semiconductor Is Now pSemi
KR Electronics Intros 1208 MHz Surface Mount Lowpass Filter
 Saelig Company announces the availability of the compact
RTSA7550 Real-Time Spectrum
Analyzer - a powerful, full-featured spectrum analyzer designed to analyze wireless signals
in real-time (not progressively scanned). This is essential for seeing intermittent and frequency-varying
signals. The Model RTSA7550 has all the standard features of a conventional spectrum analyzer
such as frequency controls, marker functions, and multi-trace functionality. Instead of scanning
through a frequency range, the RTSA sees all frequencies at once, thus catching intermittent
signals ...
 KR Electronics part number
3012-916 is a
916 MHz bandpass filter designed for Positive Train Control (PTC) applications. Encapsulated
for enhanced shock and vibration resistance, 50 Ω source and load, N(F) to N(M) connectors.
The filters are encapsulated/ruggedized for enhanced shock and vibration resistance. Thousands
are currently installed and operating successfully in the field with major rail companies.
Other frequencies and bandwidths are available ...
 ConductRF invites
you to visit their design and sales team in booth #528 at Electronic Design Innovation Conference &
Exhibition (EDI CON) in Boston. The event runs September 11-13 at the Hynes Convention Center.
ConductRF offers off-the-shelf and custom RF coaxial connector and cable solutions for applications
up to 110 GHz ...
 NI AWR Design Environment V13 will be featured in a
variety of activities at EDI CON USA 2017, being held September 11-13 in Boston. Software
demonstrations in Booth #317 and conference presentations within the Low-Power RF & IoT,
Radar / Defense, 5G Advanced Communications and RF and Microwave Design technical tracks as
well as a power amplifier (PA) design workshop will all be showcased ...
 Anatech Electronics, Inc. offers the industry's largest
portfolio of high-performance standard and customized
RF and microwave
filters and filter-related products for military, commercial, aerospace and defense, and
industrial applications up to 40 GHz. Anatech has introduced 3 new ceramic RF duplexer
filters for your convenience: a surface mount 1880 / 1960 MHz duplexer; a connectorized 770.5
/ 715.5 MHz duplexer, and a surface mount 2535 / 2655 MHz duplexer ...
 Southwest Antennas, an industry leader in MIMO / MANET
antenna solutions, is pleased to announce the introduction of two new C-Band RHCP & LHCP
body worn
patch antennas. These new antennas join their existing line of body worn antenna solutions,
including options for L and S band radios. Designed to be light weight and easily worn and
hidden in tactical clothing, these body worn antennas are ideal for use in multi-antenna MIMO
/ MANET radio applications such as handheld ...
 Planar Monolithic Industries (PMI) recently introduced four new products
in their extensive line of RF and microwave
components. Included are a 2-18 GHz threshold detector, a 0.5 to 18 GHz high power
limiter, a 6.0 to 18.0 GHz 8-bit digital phase shifter, and a 0.1 to 2.0 GHz successive log
video amplifier. Contact PMI today for more information ...
 Saelig Company has introduced the
GW Instek MDO-2000E
Series Oscilloscopes which combine several test instruments in one enclosure. An actual
spectrum analyzer is included in the design, not just an FFT calculation to display the frequency
domain. The series includes two instrument combinations: MDO-2000EG and MDO-2000EX. MDO-2000EG
models have a built-in true spectrum analyzer and a dual channel 25 MHz arbitrary waveform
generator, while the MDO-2000EX models feature ...
 The agendas have been set and registration is open
for the China and Taiwan leg of the seventh annual AWR
Design Forum (ADF 2017). The tour will visit Beijing and Chengdu on September 26 and 29
respectively, followed by a stop in Hsinchu, Taiwan on October 3. Highlights of the China
and Taiwan ADF 2017 agendas include: 5G: Multi-user multiple-in-multiple-out (MIMO), the active
phased array in 5G applications, MIMO and beam-steering ...
 ConductRF is offering standard
D38999 RF coaxial cable
assembly configurations with RF Contacts including; BMA to 20GHz SMPM to 60GHz Size #8 to
18GHz Size #12 Mil-Spec. Size #16 Mil-Spec. Cable choice include Low Loss Flexible and standard
RG styles. Custom marking and also ruggedization coverings including Nomex weave available ...
 Antenova manufacturer of antennas and RF antenna modules
for M2M and the Internet of Things, is to launch Robusta part no.
SR4G031, a new antenna for metal surfaces - at the GSMA MWC Americas show.
The antenna operates in the 1559-1609 MHz bands and is designed for tracking metal objects
and smart city applications. Antenova takes antenna design a step forward with its REFLECTOR
family, which answer to the challenge of operating on a metal surface or housing, where it
is extremely difficult for an antenna ...
 Skyworks has introduced the
SKY66403-11,
a new 2.4 GHz fully-integrated RF front-end module (FEM) designed to support ZigBee®, Thread
and next-generation Bluetooth® wireless protocols (including Bluetooth Low Energy "BLE").
This high-performance device is designed for ease of use and maximum flexibility for Internet
of Things (IoT) applications, particularly within the connected home, wearables and M2M markets.
This module is also suitable for coin cell ...
 Triad RF Systems announces the
TTRM1076, a 400 to 450 MHz, 32 W bidirectional amplifier (BDA) designed
for high data rate military and commercial radios. It is capable of 12-watt 64QAM OFDM output
and 32-watt peak power for lower data rate FM/BPSK applications. High speed switching of 1 μS
makes it compatible with time division duplex (TDD) mesh radio systems. This class A LDMOS
module is designed for both military and commercial applications. It is capable of supporting
any signal type ...
To add to its high-quality line-up of education, the
Electronic
Design Innovation Conference and Exhibition (EDI CON) USA, the first industry event to
bring together RF/microwave and high-speed digital design engineers and system integrators,
announced today its plenary keynote speakers at EDI CON USA, September 11-13 at the Hynes
Convention Center in Boston, MA. EDI CON USA will host more than 100 exhibitors and feature
88 education sessions that fall into five focused areas: RF & Microwave Design, High-Speed
Digital Design, Measurement & Modeling, Systems Engineering and 5G Advanced ...
 NuWaves
Engineering, an international Radio Frequency (RF) and Microwave solutions provider, announces
the completion of the IRaD phase for their newest miniaturized 10 watt C-band bidirectional
amplifier (BDA), to be added to their line of NuPower Xtender™ bidirectional amplifier products.
This module will be priced at $2,900/ea. in quantities of one hundred, and will be available
Q4 2017. The NuPower Xtender™ C10RX01 and C10RX02 BDA ...
 Skyworks has introduced
SKY12239-11, a voltage-controlled variable attenuator (VVA) from our series
of broadband, flat attenuation, high third order input intercept point (IIP3) products. The
device has been designed to operate over the 10 MHz to 1.5 GHz frequency band, and
is specifically optimized for use as a wide dynamic range, ultra-low distortion attenuator.
This VVA is well-suited for use in automatic power leveling or gain control circuits in military
radio, wireless infrastructure, CATV and broad market applications. Features include low insertion ...
 Saelig Company has introduced the ComfilePi - an industrial
Raspberry Pi-based touch-panel PC. Leveraging the compact, ubiquitous Raspberry Pi 3 board,
the ComfilePi inherits the Raspberry Pi 3's 1.2 GHz 64 bit quad-core ARM Cortex-A53 processor,
a Broadcom VideoCore IV GPU, and 1 GB of RAM. It comes in two screen sizes - 7" (CPi-A070WR) and 10.2"
(CPi-A102WR) both
providing identical capabilities. The displays are 24-bit color LCDs with a resistive touchscreen
and the units provide 22 x ESD-protected GPIO lines, 3 x USB 2.0 host ...
 Teledyne e2v introduces the
EV12DS460A,
the world's first K-band capable Digital-to-Analog Converter. This ground breaking DAC provides
an analog bandwidth extending beyond 7 GHz facilitating multi-band, direct digital
synthesis up to K-band (26.5 GHz). A flexible 4:1 or 2:1 input multiplexer enables
guaranteed sampling rates up to 6 GSps with the capability to operate at 7 GSps.
Teledyne e2v's EV12AS350 is set to be the only 12-bit resolution ADC on the market that combines
signal digitization at 5.4 GSps, input bandwidth in excess ...
The agenda has been set and registration is open for
the India leg of the seventh annual
AWR Design Forum (ADF
2017), featuring NI AWR Design Environment suite of high-frequency design tools. ADF 2017
will visit four cities in India: Bangalore on September 4, Hyderabad on September 6, Ahmedabad
on September 6 and New Delhi on September 8. ADF, an open forum that brings together NI AWR
software customers, partners and microwave/RF engineering ...
 Based on its recent analysis of the universal serial
bus (USB) vector network analyzer (VNA) industry, Frost & Sullivan recognizes
Copper Mountain Technologies (CMT) with the 2017 Global Frost & Sullivan Award for
Product Leadership. The imminent move of many Internet of Things (IoT) technologies from research
to commercialization is expected to drive the demand for lower cost instrumentation over the
next 5 to 10 years. CMT is well positioned to make the most of this opportunity with a strong
and established USB VNA offering that is coupled with superior customer support ...
 Today's communication systems often use complex modulation
techniques with peak-to-average ratio (PAR) signals of 9 dB and higher, requiring power
amplifiers (PAs) in these systems to operate below the power levels that would yield optimum
power-added efficiency (PAE). This application note presents a modified three-level
Doherty amplifier as an alternative to the conventional three-way Doherty amplifier. The
operating principle of the modified amplifier, which produces good efficiency over the top
10 dB of operation, is explained and the design ...
 Fairview Microwave has launched a new line of
straight waveguide sections that operate in the frequency range of 5.85 GHz
to 110 GHz and in 13 waveguide bands from C to W band. Typical applications include test
benches, instrumentation, MILCOM, SATCOM, telecom, radar and high-efficiency RF/Microwave
transmission networks. Fairview's new line of straight waveguide sections consists of 61 models
that are available in sizes ranging from WR-10 to WR-137. These waveguide straights ...
 Pasternack has launched a new series of handheld, RF
analyzer, rugged, phase-stable cable assemblies. Typical applications include field testing,
tower measurements, base station analyzers, handheld network analyzers, portable spectrum
analyzers, distance-to-fault measurements and site maintenance. Pasternack's new line of
test cables for handheld RF analyzers consists of 19 models designed to
deliver optimal amplitude and phase stability with flexure. They boast VSWR as low as 1.2:1
and maximum operating frequency of 27 GHz, depending ...
 Saelig has introduced the patented
Sol Chip Pak™ (SCP-R2801).
Power Modules which offer day/night non-stop functionality by combining state-of-the-art solar
cells, a rechargeable battery, and advanced power management circuitry. These power modules
include all the components that are required to harvest energy from ambient light, charge
a built-in rechargeable battery, and deliver a stable voltage to a load. Sol Chip's patented
technology integrates solar energy conversion with VLSI techniques ...
 Axiom Test Equipment, a provider of efficient and cost
effective solutions customers' test equipment needs, offer the following special deals on
their inventory.
Free ground
shipping is offered on all rentals! Axiom offers our customers several practical, efficient
and cost effective solutions for their business or projects' test equipment needs. Whether
you need to rent &
buy test equipment, repair test equipment,, sell or trade equipment, we are committed
to providing superior customer service and high quality electronic test equipment ...
 VidaRF offers a wide selection of
directional
couplers, dual directional couplers and hybrid couplers, designed to cover 100 MHz
to 20 GHz. Average power handling is from 50 W to 1 kW. Directional couplers
are 4 port circuits where one port is isolated from the input port and can be realized in
micro strip, strip line, coax and waveguide. Standard coupling values 6, 10, 15, 16, 20 and
30 dB. Standard Connector type: SMA female, other connectors available upon request ...
 This educational note covers the theory and practice
of digital storage oscilloscopes based on concrete measurement examples that address authentic
everyday tasks. The theoretical portion of this paper begins with an explanation of the basic
operating concepts for digital oscilloscopes, followed by a discussion of the most important
parameters to be considered when setting up and performing the exercise measurements ...
(I do wish R&S would dispense with the light blue text on
gray background)
NuWaves Engineering, an international Radio Frequency
(RF) and Microwave solutions provider, has released the latest in the NuPowerTM small, lightweight
and high-efficiency power amplifier (PA) family of products – the 100 Watt NuPowerTM
LS100A01 L & S-band PA. This PA will run at $3,775 per unit in quantities
of one hundred and will be available mid-September. The NuPowerTM LS100A01 provides saturated
RF power of 100 Watts typical in L & S-band (frequency coverage from 1.6 GHz to 2.5 GHz),
with module efficiencies of up to 45% ...
 Pasternack has released a new series of RF and microwave
power amplifier accessories that includes heat sinks, heat sinks with
cooling fans and power control cable assemblies. Heat sinks are devices that enhance heat
dissipation from a hot surface and are ideal for thermal management of power amplifiers in
test and measurement applications. A functioning power amplifier will generate elevated levels
of heat that needs to be properly dissipated to insure the internal circuit assembly does
not become damaged from extreme high temperature exposure ...
 Triad RF Systems announces the availability of their
TA1025 solid
state power amplifier produces over 1 W of linear COFDM power and 5 W peak.
The amplifier is protected from high, low, and reverse DC bias, thermal overload, and high
output VSWR. The amplifier draws 0.8 A (100% duty cycle), and measures only 3.75 x 1.9
x 0.5 in. This class A GaAs module is designed for both military and commercial applications.
It is capable of supporting any signal type and modulation format, including but not limited
to 3-4G telecom, WLAN, OFDM, DVB, and CW/AM/FM. The latest device ...
 Empower RF Systems is conducting
remote live demonstrations of our broadband, high power 1 kW 1 to 3 GHz amplifier,
Booth 321. The amplifier will be housed in Los Angeles and viewed in the IEEE EMC exhibit
venue with live streaming video while remotely controlling the amplifier from the exhibit
floor through a standard web browser. What you will see is a demonstration of remote operation
of the Empower 2170 1 kW RF amplifier in a test setup that includes a signal generator,
spectrum analyzer, external ...
 The
Electronic
Design Innovation Conference and Exhibition (EDI CON) USA, the first industry event to
bring together RF/microwave and high-speed digital design engineers and system integrators,
announced today that Analog Devices, Inc. (ADI) is taking on the role of host sponsor of the
exhibition and conference program at the Hynes Convention Center, September 11-13 in Boston,
MA. Engineers from ADI will be presenting a short course, several paper sessions, and workshops
on topics for high-frequency and high-speed electronic applications. Dr. Thomas Cameron, CTO
for ...
 ConductRF's LSA
coaxial RF cables
provide one of the most optimum and cost effective solutions for applications as diverse as
alternatives to Semi-Rigid cabling, where complex forming is required, to easy to install
jumper cables inside densely packaged RF enclosures where EMI is of concern. Features: DC
to 18 GHz, low loss & low VSWR, multi-layer 90 dB screening, broad connector ...
 Fairview Microwave, a supplier of on-demand microwave
and RF components, has released 16 new
voltage-controlled oscillator (VCO) models covering bands from 10 MHz
to 4350 MHz. Unlike traditional oscillators with a single fixed frequency, VCOs allow
the frequency of the output signal to be varied by adjusting the amplitude of the input tuning
voltage. These products are used in military electronics, SATCOM, test and measurement and
wireless communications. Typical applications include phase locked loops, function generators,
frequency synthesizers, receivers, electronic jamming ...
 The gift of a seat at the popular Bits to Waves: Building
a Modern Digital Radio in One Day workshop, which features
NI AWR Design Environment, inspired
Wilson Chung, a senior at California Polytechnic University Pomona to produce more than 100
microstrip circuits, including antennas, amplifiers, couplers, phase shifters, and more, for
his senior project. The workshop, presented by Dr. David S. Ricketts, a professor of electrical
engineering at North Carolina State University, is offered at select IEEE conferences ...
 Anatech Electronics, a manufacturer of RF and microwave
filters, has published its July
newsletter. As always, it includes both company news and some tidbits about relevant industry
happenings. In it, Sam Benzacar discusses, among other topics, an apparent demise (or near
demise) of the Commercial-Off-the-Shelf (COTS) component usage philosophy that once was a
keystone in the Department of Defense's cost containment strategy. A telling chart illustrates
the progressive decrease in COTS parts begin designed into defense systems. My guess is the
same type of trend occurred in the aeronautics and space industries as well ...
 Peregrine Semiconductor, founder of RF SOI (silicon
on insulator) and pioneer of advanced RF solutions, introduces the UltraCMOS® PE42823,
a high-power receiver protection RF switch. Ideal for wireless infrastructure applications,
this reflective switch is optimized for emerging radio architectures such as massive multiple
input, multiple output (MIMO). The PE42823 delivers excellent single-event peak power handling,
low power consumption and high linearity. Offered in a compact form factor, this high-power
switch features built-in ESD protection—a key benefit for systems that demand high ...
 Saelig Company has introduced the Pico Technology
PicoVNA 106 Low-Cost Vector Network Analyzer - an economical USB-controlled,
professional-grade 300 kHz to 6 GHz Vector Network Analyzer (VNA) with excellent
performance, portability, and affordability. Despite its small size and low cost, its full-function,
minimal-error, 'Quad RX' four-receiver architecture supports both 8- and 12-term calibration
without the uncorrectable switching errors, delays, and unreliability of traditional three-receiver
designs. The instrument supports convenient calibration methods such as 'enhanced isolation
correction' ...
 Triad RF Systems announces the availability of their
TTRM1081, an L-Band bi-directional SSPA suitable for high data-rate wireless
links. Applications include UAVs and military mesh networks. Rx noise figure is approximately
1.3 dB and Tx/Rx switching speed is 1 μS. This class AB LDMOS module is designed
for both military and commercial applications. It is capable of supporting any signal type
and modulation format, including but not limited to 3-4G telecom, WLAN, OFDM, DVB, and CW/AM/FM.
The latest device technologies and design methods are employed ...
 ConductRF's
FPA RF Cable Assemblies
provide a cost effective high performance solution for applications typically supported by
Semi-Rigid or high cost flexible precision cables. Our Multi-layer shielded cable provides
both flexibility and form-ability by combining a flexible spiral foil over which is a tin
plated copper braid which can be formed. This create a half-way situation, but with added
benefits of lower costs, improved performance and enhanced shielding. FPA Cables are available
on short lead-times with custom lengths and configurations. Precision SMA, 3.5 mm, 2.92 mm &
2.4 mm are our most common standards ...
 Saelig Company announces the availability of two new
TekBox
TBCGx Comb Generators for EMC testing. The TBCG1 is a radiating comb generator with an
internal dipole antenna and a base frequency of 100 MHz. It radiates a comb spectrum
that is characterized up to 6 GHz. The comb generator is intended as a quick reference
for testing radiated noise measurements in anechoic chambers, TEM/GTEM cells, shielded chambers,
or to gauge the effectiveness of cable shielding and other shielding materials. With its built-in
dipole antenna the TBCG1 can be used in three orientations to emit vertically- or horizontally ...
 Radiocrafts AS,
a leading provider of RF modules, today announced that it has entered a global distribution
agreement with Digi-Key Electronics,
the industry leader in electronic component selection, availability, and delivery. Design
engineers around the world get access to RF modules and design tools from Radiocrafts with
short lead-times. Radiocrafts provides surface mount RF modules for wireless networking in
the ISM bands world-wide. The modules support industry standard protocols such as Wireless
M-Bus, Sigfox and KNX-RF, and the proprietary ...
 Axiom Test Equipment, a provider of efficient and cost
effective solutions customers' test equipment needs, offer the following special deals on
their inventory. Free ground
shipping is offered on all rentals! Axiom offers our customers several practical, efficient
and cost effective solutions for their business or projects' test equipment needs. Whether
you need to rent &
buy test equipment, repair test equipment,, sell or trade equipment, we are committed
to providing superior customer service and high quality electronic test equipment ...
 Pasternack, a leading provider of RF, microwave and
millimeter wave products, has launched a new line of waveguide phase shifters in sizes ranging
from WR-42 to WR-10. Typical applications include instrumentation, test benches, product development
and characterization. Pasternack's new series of
waveguide phase shifters is comprised of seven models that operate in
the frequency range of 18 GHz to 110 GHz and in 7 waveguide bands from K to W band.
They provide phase shift range from 0 to 180 degrees and 1 dB ...
 Microwave Filter Company (MFC) continues to provide
C-band users worldwide with the largest variety of
interference
elimination filters within the industry. In addition to our line of filters that reject
"close-in" radar and WiMAX signals, we also offer an array of filters that reject undesired
transmissions operating up in the higher frequency bands (i.e. – maritime & aeronautical
radio navigation bands, X-band and Ku-band). So, whether you need clean C-band reception at
your head-end or out on the open water, we have the right interference elimination filter
for your application ...
 Innovative Power Products (IPP) is pleased to introduce
many new resistor values to their line of Low Capacitance Resistive products. Due to their lower parasitic capacitance,
these resistors are perfectly suited as isolation resistors in high power RF combiners / dividers
and transistor feedback networks. Our resistors come in standard and custom values to support
many applications and typical delivery for standard values is 1 – 2 weeks ...
 Skyworks has introduced a new product category of high-power
Bluetooth® power amplifier solutions for mobile applications targeting Wi-Fi enabled smartphones,
tablets and other portable devices. The
SKY85018-11 is a highly integrated device that is particularly suited
for improving Bluetooth® connectivity ranges, which are required for music streaming. Multiple
output power ranges and a bypass mode ensure that the SKY85018-11 is extremely reliable for
high performance devices, providing a premium audio experience. The amplifier is ...
 Anatech Electronics, Inc. offers the industry's largest portfolio of high-performance
standard and customized RF and microwave filters and filter-related products for military,
commercial, aerospace and defense, and industrial applications up to 40 GHz. Anatech
has introduced 3 new products for your convenience: a 1.5 MHz stripline bandpass filter with
SMA connectors; a triplexer filter with N connectors for the 700 MHz, 5400 MHz, 8100 MHz
bands; and a 112.5 MHz cavity bandpass filter with type W connectors ...
 Saelig Company has introduced the
Cleverscope
CS448, a unique isolated high common-mode rejection ratio (CMRR) four-channel 200 MHz
14-bit oscilloscope. It has been designed to measure high voltage, fast slew-rate signals
such as those in a full or three-phase power electronic switching bridge (e.g. gate drives
to measure voltage and charge, power switching to measure loss and parasitic stress, output
signals to measure power and spectrum for EMC compliance, control system signals for gain
/ phase and stability, etc.) The CS448 includes a built-in isolated 65 MHz signal generator
to provide stimulus ...
 Withwave's
Probe Positioner
is designed for precise RF probing measurement using T-probe which have GSG & GS contact
structure. The magnetic switch on metal base plate can be turned on and off to keep the positioner
firmly to its position or moved and lifted to a new position easily. Its articulated arm is
controlled by arm knob at the middle joint that keeps the arm firm and steady. Features include
articulated and flexible joints, easy to control to X-, Y-, Z- direction using arm knob, and
stable test measurements. Use for RF & microwave module signal ...
 VidaRF offers a new series of
power dividers
/ combiners that operate from 0.7 to 6 GHz. Available in 2-, 3-, 4-, 5-, 6-, 12-,
16- and 32-way configurations. Handles up to 30 W of power, with low insertion loss.
High port-to-port isolation. Excellent amplitude and phase balance. Operating temperature
-55 to +85 °C. Sealed and painted to meet IP65 standards. Contact VidaRF today to
see how they can meet your needs ...
 ConductRF's LMR RF Cable Assemblies are built exclusively
using Times Microwave Systems class leading LMR range of cable. Lower loss alternatives to
RG cables. DC to 6 GHz solutions. Low loss & low VSWR, multi-layer 90 dB screening,
foamed PE dielectric. Operating Temp -40 ºC to 85 ºC. Indoor & outdoor jacket
options and broad connector choices. LMR cables are used extensively in military and commercial
applications ...
 An updated V13.02 of
NI AWR Design Environment has
been released that contains many useful upgrades and enhancements to Microwave Office and
Analog Office circuit design software, Visual System Simulator™ (VSS) system design software
and AXIEM and Analyst™ 3D electromagnetic (EM) simulators. This latest release continues to
address design challenges associated with highly-integrated RF/microwave components commonly
found in communications and radar systems. Select V13.02 enhancements include: Microwave Office
Load Pull: A new script improves handling ...
 VidaRF offers a new directional coupler Model: VDC-75160A6
operates from 7.5-16 GHz. The coupler has directivity of over 15 dB with low loss
and with good VSWR. Available in 6, 10, 20 or 30 dB coupling value, 50 watts power handling
with SMA connectors, operating temp -55 to +85 °C. Sealed and painted to meet IP65 standards ...
 Triad RF Systems announces the availability of their
TTRM1109
- a Bi-Directional SSPA for domestic and foreign military and public safety wireless links.
It can handle any modulation and outputs 10 W typical BPSK and 3 W typical 64QAM
OFDM. This class A GaAs module is designed for both military and commercial applications.
It is capable of supporting any signal type and modulation format, including but not limited
to 3-4G telecom, WLAN, OFDM, DVB ...
 NuWaves Engineering, an international Radio Frequency
(RF) and Microwave solutions provider, announces the completion of the IRaD phase for their
miniaturized C-band bidirectional amplifier (BDA), to be added to their line of NuPower XtenderTM
bidirectional amplifier products. The NuPower Xtender™ C20RX01 BDA module, part number
NW-BA-C-20-RX01, follows the recent releases of both the C-Band Low Noise
Amplifier and the C-Band Power Amplifier (NuPowerTM C20R01) as NuWaves looks to push their
presence and expertise to higher-frequency ...
 The Electronic Design Innovation Conference and Exhibition
(EDI CON) USA, the first industry event to bring together RF/microwave and high-speed digital
design engineers and system integrators, announced today the addition of a full day of training
to its conference program at the Hynes Convention Center, September 11-13 in Boston, MA. Organizers
of EDI CON have invited industry experts to teach
3-hour short courses
on relevant topics necessary for success in today's high-speed and high-frequency designs.
The day also includes sponsored 3-hour training ...
 Anatech Electronics, a manufacturer of RF and microwave
filters, has published its June newsletter. As always, it includes both company news and some
tidbits about relevant industry happenings. In it, Sam Benzacar discusses, among other topics,
the ever-increasing occurrence of RF interference in the IoT device population. Both long-occupied
and new areas of the electromagnetic spectrum are experiencing a rise in noise floors, necessitating
challenging filter designs. Anatech's business is to make certain that system and circuit
designers have capable filters available to assure ...
 Rugged
VNA RF Test Cables
to 18, 27 and 40 GHz. 18 GHz options include SMA, Type-N and TNC Higher Frequency
solutions include; 3.5mm, 2.92mm and 2.4mm. Also offered is ConductRF's Hi-Flex VNA Series
to 50 and 70 GHz phase stable & low loss professional series with light armor protection
and NMD head options. In-stock at
Newark.
Visit ConductRF today for these and many other cabling options ...
 Saelig Company announces the availability of the
Mercury™ T2C USB 2.0 & Power Delivery Protocol Analyzer that offers the newest USB
Type-C connection. The Mercury T2C is a small and affordable hardware-based USB protocol analyzer.
It is the industry's first ultra-portable, hardware-based, USB and Power Delivery protocol
analyzer. It combines the de-facto standard CATC Trace™ display, comprehensive USB class decoding,
and PD 2.0 protocol analysis. The pocket-sized, bus-powered Mercury T2C sits in-line between
host ...
|
